More than 50 Hot Tub models available : Wooden models in Spruce, Larch, Oak and Red Cedar, Plastic models in Bleu or Black colour inside, Oval or Round models, Hot Tubs with bubbles..., Hot Tub models based on special request.....
The Hot Tub with Whirlpoolsystem
 
 
 
                                  
 
 
Regularly we receive the request for Firewood Hot Tubs "with bubbles" .. to deliver.
In cooperation with Technojet to Albergen we have developed a solution for this.
 
We can provide a complete whirlpoolset including all accessories for a Hot Tub. 
 
The set consists of:
 
1. Pump
2. Aspirated
3. Ventury jets
4. Hoses
5. A pneumatic switch on and off. 
 
 
1. The Pump
 
                                   
 
 
The pump has a pneumatic on / off switching, ie the pneumatic switch in the bath is an air hose connected to the pump. The pneumatic switch in pressing the pump is running, pressing again is out. Safe because it has no current connections. The pump has 2 outputs for the 2 ventury jets can be separately attached. With frost, the pump to be pulled. Also, the pump dry to stand out in such a small wooden box with proper ventilation. 
 
2. Aspirated
 
                 
 
Installation approx 25 cm from the bottom. Make sure the pump is always below this level to avoid running dry! Depending on thickness of the wooden bath, a little bit milling needs to be done.
 
3. Ventury jets
 
                             
 
These ventury jets are also sucking air which will on their turn increase the effect.  
 
Package content: 
 
Pump 600 watt - 1 x aspirated - 2 x ventury jets - Switch + 5 meter air hose 4 mm - 6 meter sealant white pvc hose connection nozzles for 32 mm tube glue. The aspirated you in any hardware store PVC pipe 50 mm available.
 
Complete sets and brochure can be sent on request.

 Back to Prices & Models ?  -  Back to Quality ?   -  Back to Waterfiltration ? 
© Invert Ontwerp